Concrete Contractor in Lumberton, TX - Driveways and Slabs Built on a Packed Base
Advanced Beaumont Concrete is a concrete contractor working in Lumberton, TX. We pour driveways, patios, sidewalks, slabs and footings for homes and businesses here, and we start every job with the ground under it.
- Licensed and fully insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
Lumberton homes and lots as we see them
Lumberton sits on the ground between Pine Island Bayou and Village Creek, a short drive up US 96 for a concrete contractor based in Beaumont, TX like us. Most calls here come from homeowners with a driveway that's sunk where it meets the street, a patio cracked across the middle or a new shop that needs a slab, plus the odd business that wants a lot poured. We do the same kind of work a little farther up the road in Silsbee.
With a bayou on one side of town and a creek on the other, the first thing I look at on a Lumberton lot is where the water goes. That decides which way we slope the slab and how much base we dig out and pack before the pour.
Concrete work we do for Lumberton properties
For Lumberton driveways that have sunk where they meet the street or split down the middle, we tear out, pack a new base and pour.
A back patio here needs to fall away from the house so rain runs into the yard, and we set that slope before we set a single form.
Stamped concrete gives a Lumberton patio or walk the look of stone or brick in one pour, with a sealer on top to keep the color.
A walk to the front door or out to the shop sits on the same packed base we give a driveway, with a thinner slab on top.
When a garage floor has cracked and sunk at the door, we break it out and pour a new one that's thick enough to carry a truck.
Color, a scored pattern or a different finish can dress up a porch, entry or patio here, and it all still sits on a base we pack first.
Where a yard steps down toward a ditch, a concrete retaining wall holds the dirt back and gives you a flat spot you can actually use.
Shops, barns and additions around Lumberton need a floor that's flat and level, and we pour and trowel them smooth for that.
A Lumberton pool deck takes bare feet and splash water all summer, so we give it a finish with some grip and slope it away from the pool.
Front and back steps here that have pulled away from the house or cracked at the edges get broken out and poured again with steel inside.
A new house, addition or shop here usually sits on a slab, and the dirt pad under it gets more of our time than the pour itself.
For buildings that need more than a plain slab, we lay out, dig and pour the foundation to the plans your builder or engineer hands us.
Businesses along the main roads through Lumberton call us for parking lots that carry daily traffic and send the water where it belongs.
Footings carry the weight of a porch post, a carport or a shop wall, so we dig them to firm ground before any concrete goes in.
When a slab or part of a house has settled and doors start sticking, we look at why it sank before we talk about lifting it.
We saw openings in existing slabs for plumbing, doorways or a cleaner tear-out, so you don't lose more concrete than the job needs.
Get a free written estimate for your Lumberton job
Send the form and we'll get back to you within one business day. I'll come out, walk the job with you, and you get a free written estimate with no pressure to book.
(409) 240-0378- Based in
- Beaumont, TX 77702
- Hours
- Mon–Fri: 6 AM–11 PM, Sat–Sun: 8 AM–9 PM
Permits, registration and pricing in Lumberton
Building permits here come from the City of Lumberton, and whether your job needs one is the city's call. When it does, the owner or someone acting for the owner files a signed application on the city's form, and the pour waits until that's settled, so we start asking early. We look up what the city asks for on your address, tell you what we found, and handle the paperwork and inspection bookings when the permit is ours to hold. The city also requires contractors on permitted work to register with it, which is worth checking on anyone you hire, and if plumbing has to move for a new slab, that part goes to a plumber licensed by the state plumbing board.
Most Lumberton jobs are houses on their own lots off US 96 and the roads around it, so getting a mixer truck close is usually easy, and it's a patio behind a fence or a tight side yard that adds pump or wheelbarrow time. Your price moves with the size and thickness of the slab, how much old concrete comes out and how much digging and packing the ground needs. The schedule turns on the permit, the weather on pour day and curing, the days concrete needs to harden before you use it, and your written estimate puts your own figure on all of it. We do the same work down in Nederland and over in Vidor.
Why Lumberton driveways and patios crack and sink
Most sunken driveways and tilted patios we get called to here didn't fail at the top. They were poured on dirt that was raked level instead of dug out and packed, so the subgrade, the ground the slab sits on, kept settling and took the concrete down with it in pieces. We dig out the soft stuff, bring in base and pack it before the truck shows up. That's the part you can't see on day one and the first thing people want to trim from the budget, but if money's tight I'd rather put it under the slab than into a fancier finish, because a nice finish on a sinking slab is just a nicer-looking problem.
The other thing we see is water and cracks in the wrong places. A slab that falls toward the house sends rain to your foundation, so we check where the water runs and slope away from the house. Concrete cracks as it shrinks, and control joints, the grooves we cut across the slab, give it a straight line to crack along, so we cut them on time and the cracks usually go where we chose.
How a Lumberton concrete job runs, start to finish
Here's what happens from the time you call or send the form to the day we walk the finished slab with you.
- +01
Call or send the form
Tell us what you've got and what you want, and we get back to you to set a time for me to come out. A few photos of the old slab help if you have them.
- +02
I walk the ground with you
I look at the ground, where the water goes and what you want, and it's best if you're there so we can talk it through. You get a written estimate that spells out what you're paying for, so the price isn't a guess.
- +03
We sort permits and pour
If you go ahead, we check what the city needs, handle the permit side when it's ours, and plan the pour around any review the city does. Our small crew does the work, and I'm out there working alongside them.
- +04
We walk the finished job
When it's poured and finished, we walk it with you and go over when you can walk on it and when you can drive on it. Satisfaction guaranteed on every job.
Questions about concrete work in Lumberton
How much does a new concrete driveway cost in Lumberton, TX?
There's no one price, because tear-out and base work swing a Lumberton driveway's total more than the concrete itself does. A broom finish, the light texture that gives tires and shoes some grip, costs less than stamping or color, and rebar, the steel inside the slab, adds a little but helps hold cracks tight. I give you a written estimate after I've seen your ground, so the number fits your lot.
Does my concrete contractor need to register with the City of Lumberton?
Yes, the city requires every contractor paid for permitted building work to register with it, including anyone subletting part of the job, and to renew each year. Registration comes with proof on file with the city clerk of either a permit bond of $10,000 or 10 percent of the project's value, whichever is greater, or general liability insurance of $300,000 per occurrence and $600,000 in total. Ask before the work starts.
How do I check the flood hazard for my property in Lumberton?
Look up your address on FEMA's Flood Map Service Center or NFHL Viewer, which FEMA calls the best place to start for official flood hazard determinations. It's worth doing before work begins, and when I come out I'll look at where water actually runs on your lot.
How long before I can drive on a new concrete driveway in Lumberton?
You can walk on a new driveway well before you can drive on it, and I'll give you both dates for your pour. Parking on it too soon can crack an edge while it's still curing, and we pour early in the day when we can, because a top that dries too fast in midday heat turns weak and dusty later.
Will my new concrete patio in Lumberton crack like the old one?
It'll probably crack somewhere, because all concrete does, but a patio on a packed base with joints cut on time usually cracks in the joints and stays level. The old one likely broke across the middle and sank because nothing told it where to crack and the dirt under it moved.
What is the best way to fix a cracked concrete driveway in Lumberton, repair or replace?
If the slab is still level and the cracks are thin, sealing them buys you time, but if it has sunk or broken into pieces, tearing out and pouring on a new base is usually the better money. Patching on top of moving ground just means you'll be patching again.
Get your Lumberton concrete job priced
An old slab tells me a lot about the ground under it, so call (409) 240-0378 or send the form while it's still there to look at.
Beaumont, TX